Self Adhesive Vinyl for Wood Surface - Self Adhesive Vinyl Sticker

SPECIAL OF THE MONTH

UV HIGH QUALITY PRINTING

NEW PRODUCT

CANVAS WRAP UP TO 10 X 16 FEET

YARD SIGNS ON SALE - $2.52 EACH 300 or more, Full Color 18"x24" Single Side Print

UV LED printing is a new high quality eco friendly printing method for large format printing

Custom Printed Pennant Flags

Great Deal now on Canvas Gallery Wrap

Echod Graphics offer Self Adhesive Vinyl for Wood Surface, the vinyl has a very aggressive adhesive that will work on a clean painted plywood, however, before making your choice of using plywood, please read below to see if other alternatives substrates are available.

Can You Install Standard Self Adhesive Vinyl (not specifically for wood surface) on a Plywood Blank?

Actually plywood and painted plywood are not good substrates for vinyl. Vinyl is an adhesive backed film that is expected to last for years outdoors in all kinds of weather. To achieve that longevity, the adhesive must have a firm bond with the substrate. This requires the use of very smooth substrates like glass, corrugated plastic, foam core, and painted aluminum. Rough surfaces like unfinished plywood will not provide a sufficient bond with the adhesives used on vinyl films. The vinyl may stick initially, but sooner or later (probably sooner), it’s going to come off.

For long term outdoor graphics, the smooth substrates mentioned above are the best choice. For larger graphics, heavier substrates are required. The most compatible options will be aluminum composite materials. These products are comprised of a sheet of aluminum laminated to a thick, flex resistant core made of a corrugated composite or plastic product. There are different trade names for these, but if you look for Alumacore, Alumalite, or DIBOND®, you’ll be able to find a reliable substrate for long term outdoor signage. MDO plywood composite is also a commonly used sign substrate. But If you choose MDO, please make sure it’s properly prepared and painted.

Speaking of paint, the other question we get is about what kind of painted substrates are suitable. There are two things to watch out for; porous paints that won’t make a good seal with the adhesive, and uncured paint. The best paints to use are those developed for sign making, like 1 Shot brand. If you can’t find One Shot, try an enamel paint. And make sure if you’re putting vinyl on any painted surface that the paint is completely cured. Fresh paint emits VOCs* that may react chemically with the vinyl’s adhesive and degrade it, causing failure after application.

*volatile organic compounds.


VINYL BANNERS	MESH PRINTING	BILLBOARD FLEX	POLE BANNERS	BACKDROP PRINTING	FABRIC PRINTING	STEP & REPEAT